Toyota Camry 2012-2017 2.5L Front Right Passenger CV Axle Shaft Assembly, 40 in

Details

Brand

Youxmoto

Condition

Used, good condition

Item number

1697

Description

Youxmoto front CV axle shaft assembly for the Toyota Camry with the 2.5L four-cylinder gas engine, 2012-2017. Not for the Hybrid. One shaft, not a pair. It is the longer of the two shafts out of the Youxmoto YXDVA050 driver-and-passenger kit, which on this car is the passenger (right-hand) side. It measures 40 inches overall, from the tip of the splined transmission end to the tip of the threaded wheel stub. Replaces Toyota 43420-06810, 43420-06811, 43410-06730, 43410-06732 and 43410-33310, and interchanges with 66-5410 and 66-5294. 26 outer splines, 24 inner splines, 48-tooth ABS ring, with the factory rubber damper clamped to the bar. It has never been fitted to a car. The splines and threads are unworn and the flat face behind the ABS ring is dull all the way round, with no polished band where a hub would have clamped against it. Rolled on the floor it runs true along its whole length, watched at the wheel end and at the transmission end, and both joints swing through their full travel smoothly with no catch, click or grinding. Both rubber boots are intact, with no splits or tears. The steel shield ring where the inner joint meets the transmission-side bar is pushed out of round and scraped bright on one side. It is a dust cover pressed on over the outside of the joint, not part of the drive. The forged joint housings are covered in reddish-brown surface rust from storage, all the way round at both ends. The machined surfaces - the splines, the threads and the toothed ABS ring - are still bright and unpitted. Grease is smeared over the outer joint clamp and dried into the first boot pleats. The slot across the end face of the threaded wheel stub is a machined feature, not damage. No axle nut, hardware or paperwork is included.